Case 4 Noise

Draft setup 28th March

I've been thinking about packing Case 4 with (probably) four discrete noisy patches, each meriting the marat (arhythmic, atonal muck) seal of approval. This would be a winner for the next synth meet, wherever and whenever that might be. Candidates include:

1. My favourite pairing,  Trogotronic 676 and Strakal Brulu with a versatile VCO to poke the former. The Plan B worked well at Brighton.

2. Livewire Dual Cyclotron plus AFG.

3. Bubblesound uLFO plus a (yet to be acquired) delay, as here. The patch also uses a Doepfer A110
VCO.

4. Flame talking synth (ytba nabbed one on ebay at a decent price later that day) with whatever it likes. Instruction manual here.
5. Synchrodyne and Maths (50% in stock) video here. In terms of HP, it's either #2 or #5.

v2 draft 1st April 

Perhaps a Pittsburgh LFO2 would fit in - excellent cost benefit case.

Run them through the Cwejman mixer to fiddle the levels and pans.

I'll work on the setup in modular grid. Case  4 will hold three rows of 65HP and includes the A199 spring reverb.

This thread on haiku patches is pertinent. It includes a post on the Maths Synchrodyne patch.
And a post on pairing the VILFO and Morphing Terrarium, there's a beautifully noisy sound file here.
There also links to two other threads - One Module and ultra-small patches.

There's a v2 with option 5 replacing option 2. I have also added my custom IO to modulargrid and a VILFO to the setup.

SoS: Weird Science

Al James' extensive piece in the April 2013 Sound on Sound examines modules by category, giving brief appraisals of the most highly recommended products and listing additional honourable mentions. Discussed on Muffwiggler here.
And here's a run-down (I have the ones in bold):

Oscillators
Tiptop Z3000
Intellijel Dixie II (for size) and Rubicon (for flexibility)
Cyclonix Cyclebox
Makenoise DPO
Harvestman Piston Honda
Livewire AFG
HMs: Flame Talking Synth; Harvestman Hertz Donut; ASol and ASys; Bubblesound VCOb; Cwejman VCO6; Doepfer; Kilpatrick K3020, Metasonix R55; MFB Triple; Pittsburgh Generator; Malekko Anti.

Filters
Tiptop Z2040
Intellijel Korgasmotron
Harvestman Formanta Plovoks (worth a look from the description)
Livewire Frequensteiner
Doepfer Wasp
FoH Plague Bearer
HMs: AMSynth range; ASys RS500e; Cwejman range; Bubblesound SEM20; Doepfer range; Harvestman Bionic Lester; Intellijel Dr Octature; Metasonix R52; Pittsburgh; Toppobrillo; Malekko Borg & Boogie; WMD Synchrodyne and Hadron Collider.

Function Generators
MakeNoise Maths
MakeNoise Wogglebug
ADDAC Marble Physics
HMs 4MS PEG; ASys RS510e; Bubblesound uLFO;  Circuit Abbey ADSRjr; Flame C3 Knob Recorder; Harvestman Double ANdore; Intellijel Quadra and Planar; MFB Dual LFO; Pittsburgh ADSR; Synthesis Tech E355 Morphing Dual LFO; Malekko Envelator and NoiseRing.

Sequencers, Clock Dividers & Pitch Quantisation
Tiptop Z8000 Matrix Sequencer
MakeNoise Pressure Points and René
4MS RCD and SCM
Intellijel uScale
HMs
Pitch - ADDAC 207; Flame Tame Machine and Chord Machine; Doepfer A156; Toppobrillo Quantimator
Sequence - Modcan Touch; Intellijel Metropolis and uStep; Doepfer A155
Clock - Flame Clockwork; Doepfer A160; 4MS PEG

Mixers, Low-pass Gates, Utilities & Logic
MakeNoise Optomix and ModDemix
Intellijel Mutamix
HMs Doepfer range; Fonitronik MH01; Intellijel Unity Mixer;  Manhatten Mix; STG .Mix; Synovatron CV Tools.

Effects
Tiptop Z5000 and ZDSP
Harvestman Malgorithm and Tyme Sefari
MakeNoise Echophon and Phonogene
Intellijel  uFold
Toppobrillo Triple Wavefolder
Doepfer Spring Reverb
ASol SR01
HMs: Flame FX6; Doepfer BBDs; Pittsburgh Delay; FoH Sound of Shadows; Snazzy FX Ardcore; Synthesis Tech Deflector Shield; WMD Geiger Counter

The second image is the author's current setup.

They [nearly] fit

Schneider's parcel arrived today and so all the essential modules are now to hand.
And they fit in several important ways:

• there's enough HP - and a little to spare for module juggling;
• it's deep enough for the A113 sub; but
• adding my luxurious velvet lining made the lid a rather tight fit which I dealt with by trimming the edges and applying some brute force;
• it has also stiffened the lid and there is not quite enough space for the module knobs.

A few shavings off the side walls will take care of that tomorrow and I'll probably add the new handle at the same time as it's bound to be needed soon and disassembling the lot when the modules are screwed down will be a pain.

Here's a snap, and here's Kevin.

20th March
A delay in completing as the screws I ordered seem to have gone astray. More on the way.

There's a major article in the new Sound on Sound on boutique modules. I'll digest that and reconsider the wish list which currently comprises the Delptronics Little Drummer Boy, a delay, either f(h) or Pittsburgh and perhaps the rather expensive WMD Synchrodyne.

Case 5

Even before installing any modules, the plywood adds significantly to the weight of the case and I doubt whether the original handle will be up to the task for long. I have ordered a new (described as) heavy duty leather case from Stagebox Online. They only had black. This should bolt through to the new plywood sidewall.

On the rails question, the problem with installing the (superior in use) aluminium type is locating the bolt holes accurately: a problem which is solved by rack ears but only at the expense of lost HP. It occurred to me this morning that I can use the bolt holes in the rack ears as a template for drilling holes in the plywood. Certainly worth a try, especially as I will be using rail offcuts from Case 4. There's no loss in trying and if it doesn't work I can still revert to wooden rails.

Thursday 7th
Schneiders report the modules are now in stock, so they should be here by the end of next week.

I fiddled with the rack ears but decided in the end to go for wooden rails. I'm hoping to complete the case this weekend (though the rugby will interrupt), including a makeover for the inside of the lid with an extravagant fabric.

The remaining aluminium rails can upgrade cases 2 and 3. I have one more spare Doepfer power unit, so one more case can be made.

A nagging question is the size of the Heisenberg and the RS35 as these will jockey for position in the case to drive the noise. The Heisenberg is 14HP and the RS35 12HP, so no problem swapping.

Friday 8th
On with the wooden rails. The Doepfer Mechanical Details page (click Products - Mechanical) shows module height as 128.5mm with the distance between the centres of the mounting holes as 122.5.

Woodwork complete ahead of schedule. As hoped, there's a small storage space at the top for patch cables. I just need to stain it and reline the lid. I was hoping for a paisley design, but my local haberdasher was asking £67 per metre (most of which would go spare) and so I settled for an offcut of blue velvet for £1 from a nearby charity shop. Fedex have confirmed the modules are on their way from Berlin: it usually takes the best part of a week. The new case handle is here - just the right size and looks pretty sturdy.


Saturday 9th
All done but the lid lining. I'll leave the old handle on until it gives way.

The modules have reached Cologne.

There's an excellent Heisenberg demo here.

Case 5 (Trautonium)

The inside of the case is a bit of a mess (fig. 1) and so I have lined it with plywood (fig. 2).

I would still like the case to be self-contained, i.e. to carry the wall-wart and a small speaker and so have incorporated compartments for those (fig. 3), but not yet as a permanent fixture.

I'll still need to ensure that the essential modules will fit, bearing in mind the rather thick plywood I have available (left over from tiling the bathroom floor) and the inevitable loss of space if I use aluminium rails and rack-ears. Perhaps a rethink (all modules, no storage) will be necessary.

The Doepfer article on the Trautonium, which I have quoted at length here, states

Oskar Sala used for nearly all recordings a freeuncy shifter (made by the German company Telefunken). This is why we included the Frequency Shifter A-126.

and

Another module that could be included is the Spring Reverb A-199. Mr Sala used reverb or delay for almost all recordings.

And this is clearly demonstrated in this video of  a 1991 concert. This made me wonder whether I would regret not incorporating these (FS. delay and/or reverb) into a larger case, however

1.  the FS is significantly deeper, requiring a much larger case;
2. those units are separate in Sala's setup; and
3. I had already bought a case

and so I'll steam ahead and see where it ends up. If necessary I can buy some thinner plywood, use space-saving wooden rails or aluminium rails without the rack-ears.

My probable minimum module set is shown in this Modular Grid  example. Most of the HPs are listed in this post and the Heisenberg is 14HP

Zeus - Heisenberg - 2 * VCOs - sub - noise = 4 + 14 + (2*10) + 26 + 8 = 72 HP

foot - ribbon - vclfo - mixer - filter - lfo - adsr - dvca = 4 + 8 + 8 + 8 + 20 + 8 + 8 + 8 = 72 HP

The space with compartments is about 14½ inches (72HP) without is 17½ inches (87HP). I'll calculate the loss for rack-ears later.

I might not need the second LFO.
The foot controller is included (only 4HP), but there is no space for foot controls.

Other VCOs might make the sound more interesting, but I think the Doepfer is the narrowest I have (ASys RS95E is 12HP).
I would quite like to have an ASys RS35 (see apples and pears) in addition to the Heisenberg, but that's not going to happen with Plan A.
If I accept a separate case of utility modules (FS (deep), delay reverb), I guess this could also house the Heisenberg and RS35 and others which could usefully serve any of the other cases.

I guess the easiest solution is to build v.1 of the case with wooden rails (no loss of HP) and then consider v.2 with aluminium.

Storage for the 60cm ribbon controller also needs consideration. I thought of a snooker cue case (these come up easily and cheaply on ebay). There are also those cylinder art holder things and perhaps plastic tubing could be employed.

Schneiders say two weeks for the out-of-stock modules (104 & 140).

Modules

The second ASys RS-35 has arrived (the converter cable has to be ordered separately, but there should be one on the ASys VCO I can commandeer in the short term.
I have ordered the  Trautonium bits (filter, sub-osc, footswitch, an extra ADSR) from Schneider, including rails and rack-ears for the case. The A103 filter is shown as out of stock (I expect there's been a run on them following the Trautoniks Trautonium publicity), so this could take some time.

Just the Delptronics Little Drummer Boy and a delay to go on the current list.

There's a quick burst of the RS-35 here on Vimeo.

Trautonium 2Mar13

The case arrived today. It's in reasonable condition. It looks as though the modules should fit, although the lid sits snugly over the main compartment and so the control surface will have to be recessed to close the lid over the knobs and patch leads will be right out.

I have transferred the Doepfer Trautonium module suggestions (shown here) to Modular Grid. A few changes - I removed the bus access and replaced the two separate VCAs with the dual unit. The Frequency Shifter, though it would be fun to have in the suitcase, will probably not fit with a depth of 105.

I'll make a start on the plywood inserts for the case. I will almost certainly go for aluminium rails rather than wood (the offcuts from Case 4 are just about the right size) and  intend to upgrade Case 2 and Case 3 to aluminium at some point. Wooden rails are easy to make, but not satisfactory when the intention is to move modules around.

I'll order the modules and alumongery from Schneiders as soon as the liberated funds arrive.

There are some terrific Ttm performances on YouTube by Oskar Sala: here's one and the rest are in the menu. There seems to be a lot of delay/echo used in the performance: perhaps that's another requirement for the Case.